How to remove the Driver airbag(DAB)module and clock spring

How to remove the driver airbag(DAB)module and clock spring

This site aims all car owner to give knowledge about Auto repair And Study guide for them to be aware and to know the problem of their car.All my post can be adapt to any auto brand because they have only one principles but different in technical name.

Model:Hyundai Azera (TG)

Year Model: 2009

Fuel: Gasoline

Displacement: 3.8 DOHC

Subject: Driver Airbag (DAB) Module and Clock Spring. 

Auto repair and Study guide to REMOVAL

1.Auto repair and Study guide to Disconnect the battery negative cable and wait for at least three minutes before beginning work

2.Auto repair and Study guide to Remove the airbag module mounting bolts in Hyundai car(2EA).

3.Auto repair and Study guide to Disconnect the horn connector(A).

4.Auto repair and Study guide to Release the connector locking pin, then disconnect the driver airbag module connector(B).

Auto repair and Study guide to The removed airbag module should be stored in a clean, dry place with the pad cover face up.

5.Auto repair and Study guide to Remove the steering wheel and steering wheel column cover of Hyundai car(Refer to ST group).

6.Auto repair and Study guide to Disconnect the clock spring and horn connector, then remove the clock spring.

2009  G 3.8 DOHC  Driver Airbag (DAB) Module and Clock Spring

AUTO REPAIR AND STUDY guide to INSTALLATION

1.Auto repair and Study guide to Disconnect the battery negative cable from battery and wait for at least three minutes before beginig work in Hyundai CAr.

2.Auto repair and Study guide to Remove the ignition key from the vehicle Hyundai.

3.Auto repair and Study guide to Connect the clock spring harness connector and horn harness connector to the clock spring of Hyundai.

4.Auto repair and Study guide to Set the clock spring on neutral position and after turning the front wheels to the straight-ahead position, install the clock spring of Hyundai.

As described direction on the clock spring warning label, align the centerline with adjusting the setting mark(▶◀).

5.Auto repair and Study guide to Install the steering wheel column cover and the steering wheelof Hyundai. (Refer to ST group)

6.Auto repair and Study guide to Connect the Driver Airbag (DAB) module connector and horn connector, then install the Driver Airbag (DAB) module on the steering wheel of Hyundai.

7.Auto repair and Study guide to Secure the Driver Airbag (DAB) with the new mounting bolts of Hyundai.

---

Tightening torque (DAB Mounting Bolt)

: 0.8 ~ 1.1 kgf.m (7.9 ~ 10.8 Nm, 5.8 ~ 8.0 lb.ft)

---

8.Auto repair and Study guide to Connect the battery negative cable of Hyundai.

9.Auto repair and Study gude to After installing the airbag, confirm proper system operation of Hyundai:

A.Auto repair and Study guide to Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.

B.Auto repair and Study guide to Make sure horn button works.

 

2009  G 3.8 DOHC  Driver Airbag (DAB) Module and Clock Spring

AUTO REPAIR AND STUDY GUIDE FOR INSPECTION

Auto repair and Study guide so Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.

1.Auto repair and Study guide to Check pad cover for dents, cracks or deformities.

2.Auto repair and Study guide to Check the airbag module for denting, cracking or deformation.

3.Auto repair and Study guide to Check hooks and connectors for damage, terminals for deformities, and harness for binds.

4.Auto repair and Study guide to Check airbag inflator case for dents, cracks or deformities.

5.Auto repair and Study guide to Install the airbag module to the steering wheel to check for fit or alignment with the wheel parts of  Hyundai.

A.Auto repair and Study guide so If, as a result of the following checks, even one abnormal point is discovered, replace the clock spring with a new one from Hyundai.

B.Auto repair and Study guide to Check connectors and protective tube for damage, and terminals for deformities.

 

More Auto repair and Study guide and please leave comment