How to check the power window main switch

How to check the power window switch of Hyundai car

Model :Elantra (HD)

Year Model:2009

Fuel:Gasoline

Displacement: 1600cc and 2000cc

How to check the power window switch,This Auto repair and Study guide  giving you a extra knowledge on checking main switch of power window of Hyundai.

2009  G 1.6 DOHC  Body Electrical System

AUTO REPAIR AND STUDYU GUIDE INSPECTION

POWER WINDOW MAIN SWITCH INSPECTION( Auto repair and Study guide)

1.Disconnect the negative (-) battery terminal.as Study guide and Auto repair

2.Remove the front door trim. (Refer to the Body group - front door)

3.Disconnect the 16P connector from the switch.

[LHD]

[RHD]

4.Auto repair and Study guide Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.

AUTO REPAIR AND STUDY GUIDE ASSIST POWER WINDOW SWITCH INSPECTION

1.Disconnect the negative (-) battery terminal.

2.Remove the front door trim. (Refer to the Body group - front door)

3.Disconnect the 10P connector from the switch.

4.Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.

REAR POWER WINDOW SWITCH INSPECTION

1.Disconnect the negative (-) battery terminal.

2.Remove the rear door trim. (Refer to the Body group - rear door)

3.Disconnect the 8P connector from the switch.

4.As Study guide Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.(Auto repair)

 

Auto repair , Study guide , Auto repair , Study guide , Auto repair , Study guide.

Link 1 and Link 2 leave me comment

How to repair signal and hazard light malfunctioning.

Auto repair and Study guide How to repair signal and hazard light malfunctioning of Hyundai car.

This Auto repair and Study guide can also apply to the other brand of car,most especially to the KIA auto.cause they have one company.this trouble shooting study is taken today to the Hyundai sonata YF 2011.

Model: Hyundai sonata (YF)

Year of Model: 2011

Displacement:2400cc

Subject:Auto repair and Study guide ,Signal and hazard light malfunctioning the  RH signal light is continuous on.

1) Cause:

• Smart fuse box or Inside pass.fuse box.

2) Diagnosis:

• Auto repair and Study guide 1) to check the fuses first :OK fuse.
• Auto repair and Study guide 2) Check for the if has a grounded from terminal couse the owner put a plastic carpet on his car: OK no problem.
• Auto repair and Study guide 3) Check with the known good condition fuse box.

Note: This model the relay of the signal light is built in inside the I/P fuse box.

• After replace the Hyundai I/P fuse box the signal and Hazard light functioning.

3) Auto repair and Study guide

• Replace the Hyundai I/P fuse  box assembly.

Auto repair and Study guide more case and repair

How to remove and repair a seat belt

how to to repair and repair a seat belt

This Study tips is applicable to all car brand.

Model : Sonata (YF)2011  G 2.4 DOHC  Restraint

Study tips Removal

1.Study tips Disconnect the battery negative cable, and wait for at least three minutes before beginning work.

2.Study tips Remove the lower anchor bolt.

3.Study tips Remove the following parts. (Refer to the Body group- Interior trim)

A.Study tips Door scuff trim

B.Study tips Center pillar trim

4.Study tips Remove the upper anchor bolt.

5.Study tips Disconnect the seat belt pretensioner connector (A).

6.Study tips Loosen the seat belt pretensioner mounting bolts (B,C) and remove the seat belt pretensioner.

Installation

1.Study tips Remove the ignition key from the vehicle.

2.Study tips Disconnect the battery negative cable and wait for at least three minutes.

3.Study tips Install the seat belt pretensioner with a bolts (B, C).

---

Tightening torque

Bolt B: 39.2 ~ 53.9 Nm (4.0 ~ 5.5 kgf.m, 28.9 ~39.8 lb.ft)

---

4.Study tips Connect the seat belt pretensioner (BPT) connector (A).

5.Study tips Install the upper anchor bolts.

---

Tightening torque

: 39.2 ~ 53.9 Nm (4.0 ~ 5.5 kgf.m, 28.9 ~39.8 lb.ft)

---

6.Study tips Install the following parts. . (Refer to the Body group- Interior trim)

A.Study tips Center pillar trim

B.Study tips Door scuff trim

7.Study tips Install the lower anchor bolts.

---

Tightening torque

: 39.2 ~ 53.9 Nm (4.0 ~ 5.5 kgf.m, 28.9 ~39.8 lb.ft)

---

8.Study tips Reconnect the battery negative cable.

9.Study tips After installing the seat belt pretensioner, confirm proper system operation:

A.Study tips Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.

Study tips

Auto repair

Study tips,Study tips,Study tips,Study tips,Study tips,Study tips,Study tips,Study tips,Study tips,